Communicate with Supplier? Supplier
Yolanda Mr. Yolanda
What can I do for you?
Contact Supplier
Home > Products > Power Trowel > Double Pan Power Trowel

Double Pan Power Trowel

Product categories of Double Pan Power Trowel, we are specialized manufacturers from China, Mini Power Trowel, Multiquip Power Trowel suppliers/factory, wholesale high-quality products of Double Pan Power Trowel R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

China Double Pan Power Trowel Suppliers

The Double Pan Power Trowel greatly reduces the labor intensity and improves the work efficiency. It has double discs, which is heavier and has a better compaction effect on the ground. The construction efficiency is significantly higher than other construction machines. Zhang lifts the pulp disc for quick pulp lift and mechanical steering to the operating system, which is sensitive, easy to control and stable in operation. The unique handle of the double-disc trowel machine allows the operator to safely control and operate freely. The adjustable handle makes the operator feel comfortable and reduces fatigue.

Features of double pan Power Trowel
1. Adopt relative rotating double trowels to make the machine run smoothly and operate safely and effortlessly.
2. The structure is compact, small and flexible, and can be constructed in kitchens, aisles, terraces, balconies and other places with small plane sizes in residential buildings.
3. Due to the small diameter of the trowel, the wiping area at the corner of the room is about half less than that of the single-head floor trowel. It can give full play to its advantages when glazing a large area of the ground.
4. Simple structure, easy manufacturing, low cost and convenient maintenance.
Construction method of double pan power trowel
1. First clean the ground floor of the building, and there is no water, and use plain cement slurry to paint about 2 mm thick as the bonding layer.
2. Transport the fine stone stick concrete from the centralized mixing place with a wheelbarrow, pour it on the ground floor of the building that has been brushed with plain cement slurry, spread it with a small square shovel, and then scrape the 2> scraping rough strip. The paving thickness of fine stone concrete is controlled at 15-20 mm.
3. The dry sand ash will be evenly removed on the surface about 2 mm thick after scraping, and the dry sand ash can be wiped with a trowel when the water absorption is wet.
4. The trowel repeats the compaction of the initial light in two directions, such as vertical and horizontal directions.If there is no slurry or dry cracks in individual places, it should be immediately sprayed with dry sand and ash and sprayed with a small amount of water before pressing; It should be supplemented by manual trimming of corners.
5. The trowel machine retreats slowly from the room to the outside of the door, and the corner light is also supplemented by people.
6. After the varnishing is completed, the concrete floor can be sprinkled and cured after the initial setting.

Related Products List